Crop a photo to 35 × 45 mm — Fiji passport
Upload a photo — the frame is already set for a Fiji passport. Ready to print or upload.
Document
No sign-up · no watermarks · your photo stays in your browser
Want studio precision?AI correction fixes the light, shadows, clothing and pose — to the document's rules.€2.99
Exact numbers for this document
| Parameter | What it must be |
|---|---|
| Print size | 35 × 45 mm |
| Pixels at 300 dpi | 413 × 531 px |
| Pixels at 600 dpi | 827 × 1063 px |
| Aspect ratio | 7:9 |
| Head, share of height | 70–80% of photo height |
| Background | Plain light background without textures or noticeable gradients. |
| Glasses | Ordinary prescription glasses are allowed: untinted lenses, a thin frame that does not cover the eyes, no reflections; sunglasses are prohibited. |
| Head covering | Headwear must not hide the face. |
What these millimetres work out to
- In a 35 × 45 mm frame a head band of 70–80% is 31.5–36 mm from the chin to the crown.
- Of the 45 mm of height that leaves 9–13.5 mm for the gap above the crown and the space below the chin together.
- At 300 dpi that is a head 372–425 pixels tall — below 372 px the file is too small to print, however good the crop is.
How to crop it, in three steps
- 01
Upload a photo taken face-on, in even light
- 02
The tool finds the face and aligns the frame itself — check that the head lands in 70–80%
- 03
Save the 35 × 45 mm result — print it or attach it to the application
What we fix for free, and what AI fixes
Fixed for free
- Background. Replaced with the one this document asks for: plain light background without textures or noticeable gradients.
- Head tilt. Straightened if the head leans slightly to one side.
- Frame. Exactly 35 × 45 mm, by the document’s rules.
- A light shadow on one side of the face. Gently brightened.
- File and print sheet. A file to the document’s rules and a 10 × 15 or A4 sheet to print.
What can't be fixed for free, AI correction fixes
- Hard shadows and uneven light on the face.
- A smile, raised brows or a half-open mouth. Cropping keeps the face it was given.
- Too few pixels. If the original is smaller than 413 × 531 px, enlarging it only blurs the face.
- Clothing and pose. Shoulders out of frame, body turned away from the camera.
Glare on the lenses. Take the glasses off or turn away from the light source and shoot again.
Why these photos get rejected — and how to fix each one
Fiji-specific things to know
- Fiji ties the face to «one inch height» as well as to 70–80 % of the photo, and says over- or under-exposure that makes the skin too dark or too light makes the photo unacceptable.
- Polaroid photos and photos printed on ordinary printers are not suitable — the guidelines ask for a professional studio print with continuous tone.
- Glasses are allowed only if clear, thin-framed and free of reflection.
Printing on a single sheet
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
10 × 15 cm · 4 × 6″Photos: 8 (4 × 2)
A4 · 21 × 29.7 cmPhotos: 36 (6 × 6)
Where these numbers come from
Source: Ministry of Immigration of the Republic of Fiji. Last checked against the official page on 1 Oct 2026.
What the source confirms
- Ministry of Immigration of Fiji, «Guidelines for Passport Photographs»: the image should be 3.5 cm × 4.5 cm with adequate brightness and contrast and a natural skin tone — if over-exposure or under-exposure makes the skin too dark or too light the photo will not be acceptable; it shows a close-up of the head and (partial) shoulders, straight-looking, centred, with a neutral expression.
- Same page, the face: in sharp focus and clear with no ink marks, creases or lines; the face (from the forehead edge to the bottom of the chin) is 70 to 80 % of the photo or one inch high; the eyes open and no hair obscuring the face; prescription glasses, if worn, clear and thin-framed with no flash reflection and not obscuring the eyes; head coverings, hair, head-dress or facial ornaments must not obscure the face.
- Same page, background and print: a plain light background; no other people or objects in the photo; uniform lighting with no shadows on the face or behind; no red-eye photos; no lines; ideally printed by a professional photo studio with continuous tone and good resolution; Polaroid photos or photos printed with ordinary printers are not suitable.
Questions people ask before cropping
What size must a passport photo be in Fiji?
35 × 45 mm. 70–80% of photo height.
How many pixels is 35 × 45 mm when printed?
413 × 531 px (300 dpi) · 827 × 1063 px (600 dpi).
How much of the frame should the head take?
70–80% of photo height.
What background does this document need?
Plain light background without textures or noticeable gradients.
What can’t be fixed here for free?
Hard shadows and uneven light on the face. A smile, raised brows or a half-open mouth. Cropping keeps the face it was given. Clothing and pose. Shoulders out of frame, body turned away from the camera. AI fixes this from the same photo — you see the result before paying.
How many photos fit on one 10×15 cm sheet?
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.