Crop a photo to 35 × 45 mm — Belgium residence card
Upload a photo — the frame is already set for a Belgium residence card. Ready to print or upload.
Document
No sign-up · no watermarks · your photo stays in your browser
Want studio precision?AI correction fixes the light, shadows, clothing and pose — to the document's rules.€5.99
Exact numbers for this document
| Parameter | What it must be |
|---|---|
| Print size | 35 × 45 mm |
| Pixels at 300 dpi | 413 × 531 px |
| Pixels at 600 dpi | 827 × 1063 px |
| Aspect ratio | 7:9 |
| Head, share of height | 70–80% of photo height |
| Background | White background and matte print without glare. #ffffff |
| Glasses | Eyes must be fully visible; no tinted lenses or strong reflections. |
| Head covering | Religious reasons only; must not cover the facial oval. |
How to crop it, in three steps
- 01
Upload a photo taken face-on, in even light
- 02
The tool finds the face and aligns the frame itself — check that the head lands in 70–80%
- 03
Save the 35 × 45 mm result — print it or attach it to the application
What we fix for free, and what AI fixes
Fixed for free
- Background. Replaced with the one this document asks for: white background and matte print without glare.
- Head tilt. Straightened if the head leans slightly to one side.
- Frame. Exactly 35 × 45 mm, by the document’s rules.
- A light shadow on one side of the face. Gently brightened.
- File and print sheet. A file to the document’s rules and a 10 × 15 or A4 sheet to print.
What can't be fixed for free, AI correction fixes
- Hard shadows and uneven light on the face.
- A smile, raised brows or a half-open mouth. Cropping keeps the face it was given.
- Too few pixels. If the original is smaller than 413 × 531 px, enlarging it only blurs the face.
- Clothing and pose. Shoulders out of frame, body turned away from the camera.
Glare on the lenses. Take the glasses off or turn away from the light source and shoot again.
Why these photos get rejected — and how to fix each one
Belgium-specific things to know
- Light background — cream, light grey, very light blue OK (not strict white)
- Same biometric spec as Belgian passport (31-36mm head)
- Issued at commune office in coordinated eID workflow
- Minimum 400 DPI print resolution required
Printing on a single sheet
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
10 × 15 cm · 4 × 6″Photos: 8 (4 × 2)
A4 · 21 × 29.7 cmPhotos: 36 (6 × 6)
Where these numbers come from
Source: FPS Foreign Affairs Belgium. Last checked against the official page on 17 May 2026.
What the source confirms
- FPS Foreign Affairs guidance confirms Belgian identity-card style photos are used for consular identity-document routes.
- The Belgian photo standard uses a 35 × 45 mm photo format.
- The photo should show the full face clearly and match the current appearance.
- The public source is descriptive and does not repeat a full residence-card biometric matrix.
- This page therefore uses official-general confidence with Belgian identity-document photo rules as the basis.
Belgian identity and residence card form photo requirements ↗
Questions people ask before cropping
What size must a residence card photo be in Belgium?
35 × 45 mm. 70–80% of photo height.
How many pixels is 35 × 45 mm when printed?
413 × 531 px (300 dpi) · 827 × 1063 px (600 dpi).
How much of the frame should the head take?
70–80% of photo height.
What background does this document need?
White background and matte print without glare.
What can’t be fixed here for free?
Hard shadows and uneven light on the face. A smile, raised brows or a half-open mouth. Cropping keeps the face it was given. Clothing and pose. Shoulders out of frame, body turned away from the camera. AI fixes this from the same photo — you see the result before paying.
How many photos fit on one 10×15 cm sheet?
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.