head 71–80 %no glasses
Free: cropping, background replacement, check
14-day refund if the authority rejects the photo
SourceAustralian Passport Office
Verified
Quick answer: The recommended Australia refugee travel document photo size is 35 × 45 mm. White or light uniform background. Head occupies 71–80% of photo height (32–36 mm chin to crown). Neutral expression, glasses prohibited. Last verified .
Requirements
| Format | 35 × 45 mm |
|---|---|
| Head height | 71–80% of photo heightICAO 9303: 70–80% |
| Head height (mm) | 32–36 mm chin to crown |
| Background | White or light uniform background. |
| Pose | Full face, head centred, no tilt or rotation. |
| Expression | Neutral expression, mouth closed, eyes open. |
| Glasses | Glasses prohibited, except for rare medical exceptions. See full rules → |
| Lighting | No retouching or digital enhancement. |
| Head covering | Religious reasons only; must not cover the facial oval. |
| Attire | Clothing must not blend into the background; face and shoulder line must be clearly defined. |
| File format | JPEG · sRGB / 24-bit |
| Millimetres | 35 × 45 mm |
|---|---|
| Centimetres | 3.5 × 4.5 cm |
| Inches | 1.38 × 1.77″ |
| Pixels at 300 dpi | 413 × 531 px |
| Pixels at 600 dpi | 827 × 1063 px |
Australia refugee travel document photos are reviewed by the issuing authority against the specifications shown in the table above. Both digital and physical submissions are checked for background colour, head position, lighting quality and file format before the document is processed.
Meet all specifications listed above before submitting. A photo that fails a single criterion — even a background shade variation — delays the entire application. The tool prepares the file to match the profile shown on this page.
Examples and mistakes
One compliant example next to the six most common rejection causes for Australia refugee travel document applications. These are the differences that most often determine whether a document photo is accepted.
How to take it
Background: white or light
The tool puts in the required background. Stand half a metre from a plain light wall, face a window and shoot without flash — then there are no shadows on your face or on the wall.
Head: 71–80 % of the photo height (32–36 mm)
Camera at eye level, about a metre away; head and shoulders in the shot. The tool crops it to 35 × 45 mm.
Glasses prohibited
Take them off before the shot.
Neutral expression, mouth closed, eyes open
Look straight into the lens with your head level; keep hair away from your eyes and eyebrows.
An ordinary selfie will do: we fix the background, light and framing ourselves — to this document's rules. The preview is free.
Head straightHold the phone at eye level and your head straightens by itself.
Face uncoveredMove your hair away so your eyes and eyebrows show.
No glassesTake your glasses off — this document's rules require it.Printing and submission
| 10 × 15 cm · 4 × 6″ | 8 (4 × 2) |
|---|---|
| A4 · 21 × 29.7 cm | 36 (6 × 6) |
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
| Authority | Australian Passport Office |
|---|---|
| Source | Australian Passport Office — Passport photos |
| Verified |
Questions
All requirements are in the table above. Format: 35 × 45 mm. Head height: 71–80%. White or light uniform background.
Yes. Use a flat, plain wall, natural daylight from a window in front of you, and the rear camera of a phone with a 3-second timer. The tool handles the crop, background normalisation and compliance check.
Glasses prohibited, except for rare medical exceptions. Removing glasses for the photo eliminates the risk of glare causing rejection, especially in automated pre-screening systems.
Most document authorities require the photo to be taken within the last six months. Use a fresh photo even if the rules technically allow older ones — recency reduces the risk of appearance-mismatch rejection.
Anfas.Pro provides a 14-day full refund if the authority rejects the photo and you supply the rejection notice.
35 × 45 mm = 3.5 × 4.5 cm = 1.38 × 1.77 inches. At 300 dpi that is 413 × 531 pixels; at 600 dpi, 827 × 1063 pixels.
Religious reasons only; must not cover the facial oval. The face must stay fully visible from chin to forehead and on both sides, with no shadow across it.
Yes. The same 35 × 45 mm format and head size apply to: citizenship application, passport, visa.