Crop a photo to 35 × 45 mm — Australia passport
Upload a photo — the frame is already set for an Australia passport. Ready to print or upload.
Document
No sign-up · no watermarks · your photo stays in your browser
Want studio precision?AI correction fixes the light, shadows, clothing and pose — to the document's rules.€5.99Exact numbers for this document
| Parameter | What it must be |
|---|---|
| Print size | 35 × 45 mm |
| Pixels at 300 dpi | 413 × 531 px |
| Pixels at 600 dpi | 827 × 1063 px |
| Aspect ratio | 7:9 |
| Head, share of height | 71–80% of photo height |
| Head, chin to crown | 32–36 mm chin to crown |
| Background | White or light uniform background. #ffffff |
| Glasses | Glasses prohibited, except for rare medical exceptions. |
| Head covering | Religious reasons only; must not cover the facial oval. |
What these millimetres work out to
- In a 35 × 45 mm frame a head band of 71–80% is 32–36 mm from the chin to the crown.
- Of the 45 mm of height that leaves 9–13 mm for the gap above the crown and the space below the chin together.
- At 300 dpi that is a head 378–425 pixels tall — below 378 px the file is too small to print, however good the crop is.
How to crop it, in three steps
- 01
Upload a photo taken face-on, in even light
- 02
The tool finds the face and aligns the frame itself — check that the head lands in 71–80%
- 03
Save the 35 × 45 mm result — print it or attach it to the application
What we fix for free, and what AI fixes
Fixed for free
- Background. Replaced with the one this document asks for: white or light uniform background.
- Head tilt. Straightened if the head leans slightly to one side.
- Frame. Exactly 35 × 45 mm, by the document’s rules.
- A light shadow on one side of the face. Gently brightened.
- File and print sheet. A file to the document’s rules and a 10 × 15 or A4 sheet to print.
What can't be fixed for free, AI correction fixes
- Hard shadows and uneven light on the face.
- A smile, raised brows or a half-open mouth. Cropping keeps the face it was given.
- Too few pixels. If the original is smaller than 413 × 531 px, enlarging it only blurs the face.
- Clothing and pose. Shoulders out of frame, body turned away from the camera.
Glasses in the frame. This document does not accept them at all — take them off and shoot again.
Why these photos get rejected — and how to fix each one
Australia-specific things to know
- The size is a range, not one number: 35–40 mm wide and 45–50 mm high, with the face from chin to crown fixed at 32–36 mm. A 35 × 45 mm print fits the range.
- The print itself is regulated: dye sublimation on heavy-weight glossy paper of at least 200 gsm. The Australian embassy in Geneva notes that many photographers there use inkjet printers, which is not acceptable.
- Glasses are not allowed unless you cannot remove them for medical reasons — and poor eyesight alone is not such a reason. If they stay on, the frames must not cover the eyes and the lenses must not reflect.
- Distance matters: the Geneva embassy says the picture must be taken from at least 1.2 m, because a close-up widens the distance between the eyes and the nose and hides the ears; portrait mode blur is also listed as a reason for rejection.
- On a paper form the guarantor signs the back of one of the two photos with «This is a true photo of [your full name]» in black pen; with the online form a referee signs nothing.
Printing on a single sheet
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
10 × 15 cm · 4 × 6″Photos: 8 (4 × 2)
A4 · 21 × 29.7 cmPhotos: 36 (6 × 6)
Where these numbers come from
Source: Australian Passport Office. Last checked against the official page on 1 Oct 2026.
What the source confirms
- Australian Passport Office: photos 35–40 mm wide and 45–50 mm high; the face from chin to crown 32–36 mm; less than 6 months old; 2 photos for every application.
- Print quality: good-quality colour prints produced using dye sublimation (not an inkjet printer) on heavy-weight glossy paper of at least 200 gsm; clear, in focus, no marks or red-eye.
- Background and light: a plain white or light background that contrasts with the face; uniform lighting with natural skin tone; face centred, looking straight at the camera, edges of the face clearly visible; no retouching, shadows, reflections or head tilt; hair must not obscure the edges of the face.
- Expression and accessories: over 3 years old — neutral expression, eyes open, mouth closed (under 3 the mouth may be open, but nobody else may be visible); no glasses unless they cannot be removed for medical reasons (vision impairment alone is not a reason); plain religious head coverings showing the whole face from chin to forehead; hearing aids allowed.
- Lodging: apply on the online form (print it) or a paper form and lodge at a participating post office with 2 photos and original identity documents; on the paper form a guarantor signs the back of one photo with «This is a true photo of [full name]», on the online form a referee confirms identity if contacted. Allow at least 6 weeks.
Questions people ask before cropping
What size must a passport photo be in Australia?
35 × 45 mm. 71–80% of photo height.
How many pixels is 35 × 45 mm when printed?
413 × 531 px (300 dpi) · 827 × 1063 px (600 dpi).
How much of the frame should the head take?
71–80% of photo height. 32–36 mm chin to crown.
What background does this document need?
White or light uniform background.
What can’t be fixed here for free?
Hard shadows and uneven light on the face. A smile, raised brows or a half-open mouth. Cropping keeps the face it was given. Clothing and pose. Shoulders out of frame, body turned away from the camera. AI fixes this from the same photo — you see the result before paying.
How many photos fit on one 10×15 cm sheet?
4 × 2 frames fit on one 10×15 cm sheet — 8 copies from a single print.

