Quick answer: This Tajikistan driver's license preset uses 30 × 40 mm with plain light background without textures or noticeable gradients. Head occupies 70–80% of photo height. Neutral expression, glasses prohibited. It is based on official general guidance; verify the final submission route on the authority portal. Last verified .
No registration · result in 60 seconds
| Format | 30 × 40 mmICAO 9303: 35 × 45 mm |
|---|---|
| Head height | 70–80% of photo height |
| Background | Plain light background without textures or noticeable gradients. |
| Pose | Strictly full face, head without rotation or tilt, shoulders level. |
| Expression | Neutral expression, mouth closed, eyes open. |
| Glasses | Clear glasses only, no reflections; sunglasses prohibited. See full rules → |
| Lighting | Shadows on the face and background not permitted. |
| Head covering | Religious reasons only; must not cover the facial oval. |
| Attire | Neutral clothing, shoulders visible, without uniform or distracting accessories. |
| Digital resolution | Check the authority portal before digital upload |
| File format | JPEG · sRGB / 24-bit |
| File size | Check the authority portal before upload |
| 10 × 15 cm · 4×6″ | 10 (5 × 2) |
|---|---|
| A4 · 21 × 29.7 cm | 49 (7 × 7) |
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
Tajikistan driver license photos are administered by the State Inspection of Road Safety (GAI) under MVD. The format follows the Tajik biometric standard: 35×45mm with head 34.5mm precise, white background.
Photo typically captured on-site at GAI exam centers using their dedicated equipment after passing theory and practical exams. Color photo only, taken within 6 months.
Same biometric workflow as Tajik passport — coordinated MVD issuance.
| Authority | ICAO baseline |
|---|---|
| Source | ICAO biometric portrait baseline |
| Verified | |
| Confidence | Inferred from ICAO |
One compliant example next to the six most common rejection causes for Tajikistan driver's license applications. The final decision always belongs to ICAO baseline, but these are the differences that most often determine whether a document photo is accepted.
Upload a portrait — the tool crops, removes the background and checks compliance against the 30 × 40 mm rule automatically.
Plain light background without textures or noticeable gradients. Stand 1–2 metres from a plain, evenly lit wall. Driving licence card printers compress contrast — starting with a flat background ensures the print retains a clean edge between the subject and background.
Even frontal light from a window. Driving licence offices in most regions accept slightly less strict lighting than passports, but shadows still affect biometric checks at modern roadside scanners.
Camera at eye level, head straight, looking at the lens. Slight head tilt fails the alignment check used by modern licence printers that embed a biometric template into the card chip.
Square shoulders, both visible. Centre your head in the frame. Driving licences typically print the photo at a small size — head proportion within the frame matters more than absolute resolution.
Clear glasses only, no reflections; sunglasses prohibited Many authorities allow eyewear when it is required for driving, but eyes must remain fully visible with no lens glare. Tinted or transition lenses that have darkened are not accepted.
Neutral expression, mouth closed, eyes open and looking directly at the lens. No smile or raised eyebrows. Modern driving licences embed a biometric template — the calibration matches the neutral expression standard.
Solid colours that contrast with the background. Avoid white tops, large jewellery near the face, or any clothing that obscures the neckline.
Verify the photo matches 30 × 40 mm, head occupies 70–80% of the frame, eyes are clearly visible. The tool catches the technical issues; the manual check prevents appearance-based rejections.
ICAO baseline publishes the following rejection codes. Knowing the exact code on your notice tells you precisely what to fix in the reshoot.
| Code | Reason | Fix |
|---|---|---|
TJ-DL-01 |
Head height not 34.5mm | Re-shoot at correct distance |
TJ-DL-02 |
Background not pure white | Re-shoot against white backdrop |
TJ-DL-03 |
Black-and-white photo | Re-shoot in color |
Plain light background without textures or noticeable gradients is required. Licence card printers compress contrast at print stage — starting with a flat, evenly lit background prevents the printed photo from looking muddy or shadowed.
Glasses with glare on the lenses, tinted lenses (including transition lenses that have darkened), or thick frames that touch the eye area are all rejection causes. The eyes must be fully visible with no obstruction.
The head must be straight and centred. Driving licence card chips store a biometric template — tilt above 3–5 degrees fails the alignment check before printing.
Smile, raised eyebrows or parted lips all cause rejection. Driving licence photos use the same neutral expression standard as passports — mouth closed, eyes open, no expression change.
Most driving licence authorities require a photo taken within the last six months. Older photos, even when appearance has not changed, cause rejection at the application desk.
Low resolution, blur, JPEG compression artefacts or low-contrast images all cause rejection. The licence printing system requires a minimum digital resolution — see the spec table above for exact pixel requirements.
Hats, caps or any clothing that covers the head or hairline are rejected. Religious head covering is generally accepted only when permanently worn and consistent with the rest of your identification documents.
This Tajikistan driver's license preset uses 30 × 40 mm based on the official guidance available for this route. Use the 70–80% head-height profile unless the authority portal gives a more specific instruction. The photo is printed on the licence card and must remain recognisable for the full validity period.
Plain light background without textures or noticeable gradients. Even, frontal light without shadow gradients. Driving licence printers tend to compress contrast — starting with even lighting prevents underexposed areas from disappearing in the final print.
Clear glasses only, no reflections; sunglasses prohibited. Many authorities specifically allow eyewear when it is required for driving, but the eyes must remain fully visible and there must be no lens glare. Tinted lenses or transition lenses that have darkened are not accepted.
Most authorities require the photo to be taken within the last six months. The licence is typically valid for 5–10 years, so use a recent photo that reflects your everyday appearance — not a one-off styled portrait.
No. Driving licence photos use the same neutral expression standard as biometric passports — closed mouth, eyes open and looking directly at the camera, no raised eyebrows. Smiles distort facial geometry used in modern biometric checks.
Anfas.Pro provides a 14-day full refund if the Tajikistan licence authority rejects the photo and you supply the rejection notice.
Anfas.Pro is an independent tool and is not affiliated with any government authority. The final decision to accept or reject a document photo rests solely with the issuing authority. Requirements change — always verify on the official authority portal before submitting.