Crop a photo to 20 × 30 mm — Vietnam temporary residence card
Upload a photo — the frame is already set for a Vietnam temporary residence card. Ready to print or upload.
Document
No sign-up · no watermarks · your photo stays in your browser
Want studio precision?AI correction fixes the light, shadows, clothing and pose — to the document's rules.€5.99
Exact numbers for this document
| Parameter | What it must be |
|---|---|
| Print size | 20 × 30 mm |
| Pixels at 300 dpi | 236 × 354 px |
| Pixels at 600 dpi | 472 × 709 px |
| Aspect ratio | 2:3 |
| Head, share of height | 70–80% of photo height |
| Background | Plain white background. |
| Glasses | Eyes must be fully visible; no tinted lenses or strong reflections. |
| Head covering | Religious reasons only; must not cover the facial oval. |
How to crop it, in three steps
- 01
Upload a photo taken face-on, in even light
- 02
The tool finds the face and aligns the frame itself — check that the head lands in 70–80%
- 03
Save the 20 × 30 mm result — print it or attach it to the application
Do not confuse it with another Vietnam document
Vietnam does not use one frame for everything. This page is about temporary residence card — 20 × 30 mm. The documents below are cut to a different size, so a file prepared here will not fit them.
- visa 40 × 60 mm
- work permit 40 × 60 mm
What we fix for free, and what AI fixes
Fixed for free
- Background. Replaced with the one this document asks for: plain white background.
- Head tilt. Straightened if the head leans slightly to one side.
- Frame. Exactly 20 × 30 mm, by the document’s rules.
- A light shadow on one side of the face. Gently brightened.
- File and print sheet. A file to the document’s rules and a 10 × 15 or A4 sheet to print.
What can't be fixed for free, AI correction fixes
- Hard shadows and uneven light on the face.
- A smile, raised brows or a half-open mouth. Cropping keeps the face it was given.
- Too few pixels. If the original is smaller than 236 × 354 px, enlarging it only blurs the face.
- Clothing and pose. Shoulders out of frame, body turned away from the camera.
Glare on the lenses. Take the glasses off or turn away from the light source and shoot again.
Why these photos get rejected — and how to fix each one
Vietnam-specific things to know
- Same 4×6 cm Vietnamese standard
- 1-3 year validity tied to work permit/visa
- Dark attire on white background
Printing on a single sheet
6 × 3 frames fit on one 10×15 cm sheet — 18 copies from a single print.
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
10 × 15 cm · 4 × 6″Photos: 25 (5 × 5)
A4 · 21 × 29.7 cmPhotos: 98 (7 × 14)
Where these numbers come from
Source: Vietnam National Public Service Portal / Ministry of Public Security. Last checked against the official page on 17 May 2026.
What the source confirms
- The National Public Service Portal identifies the procedure as issuance of a temporary residence card for foreigners.
- The implementing authority is the Immigration Department.
- The required documents include two 2 × 3 cm photos.
- One photo is attached to the NA8 declaration and one photo is submitted loose.
- The source confirms the document-specific photo size but not a separate head-height or eye-line matrix.
Questions people ask before cropping
What size must a temporary residence card photo be in Vietnam?
20 × 30 mm. 70–80% of photo height.
How many pixels is 20 × 30 mm when printed?
236 × 354 px (300 dpi) · 472 × 709 px (600 dpi).
How much of the frame should the head take?
70–80% of photo height.
What background does this document need?
Plain white background.
What can’t be fixed here for free?
Hard shadows and uneven light on the face. A smile, raised brows or a half-open mouth. Cropping keeps the face it was given. Clothing and pose. Shoulders out of frame, body turned away from the camera. AI fixes this from the same photo — you see the result before paying.
How many photos fit on one 10×15 cm sheet?
6 × 3 frames fit on one 10×15 cm sheet — 18 copies from a single print.