Crop a photo to 50 × 50 mm — Serbia passport
Upload a photo — the frame is already set for a Serbia passport. Ready to print or upload.
Document
No sign-up · no watermarks · your photo stays in your browser
Want studio precision?AI correction fixes the light, shadows, clothing and pose — to the document's rules.€5.99
Exact numbers for this document
| Parameter | What it must be |
|---|---|
| Print size | 50 × 50 mm |
| Pixels at 300 dpi | 591 × 591 px |
| Pixels at 600 dpi | 1181 × 1181 px |
| Aspect ratio | 1:1 |
| Head, share of height | 70–80% of photo height |
| Background | Plain grey background. |
| Glasses | Eyes must be fully visible; no tinted lenses or strong reflections. |
| Head covering | Religious reasons only; must not cover the facial oval. |
How to crop it, in three steps
- 01
Upload a photo taken face-on, in even light
- 02
The tool finds the face and aligns the frame itself — check that the head lands in 70–80%
- 03
Save the 50 × 50 mm result — print it or attach it to the application
Do not confuse it with another Serbia document
Serbia does not use one frame for everything. This page is about passport — 50 × 50 mm. The documents below are cut to a different size, so a file prepared here will not fit them.
passportthis page
permanent residence permit
- temporary residence permit 35 × 45 mm
- visa 35 × 45 mm
- work permit 35 × 45 mm
What we fix for free, and what AI fixes
Fixed for free
- Background. Replaced with the one this document asks for: plain grey background.
- Head tilt. Straightened if the head leans slightly to one side.
- Frame. Exactly 50 × 50 mm, by the document’s rules.
- A light shadow on one side of the face. Gently brightened.
- File and print sheet. A file to the document’s rules and a 10 × 15 or A4 sheet to print.
What can't be fixed for free, AI correction fixes
- Hard shadows and uneven light on the face.
- A smile, raised brows or a half-open mouth. Cropping keeps the face it was given.
- Too few pixels. If the original is smaller than 591 × 591 px, enlarging it only blurs the face.
- Clothing and pose. Shoulders out of frame, body turned away from the camera.
Glare on the lenses. Take the glasses off or turn away from the light source and shoot again.
Why these photos get rejected — and how to fix each one
Serbia-specific things to know
- Square 50×50mm (5×5 cm) — unique size, same as Israeli Darkon
- Head ~68% (specific, not 70-80% range)
- MUP-issued at police stations
- One of few European passports using square format
Printing on a single sheet
2 × 2 frames fit on one 10×15 cm sheet — 4 copies from a single print.
Print at 100% scale, borderless, and turn off fit-to-page so each photo keeps its exact size.
10 × 15 cm · 4 × 6″Photos: 6 (3 × 2)
A4 · 21 × 29.7 cmPhotos: 20 (4 × 5)
Where these numbers come from
Source: Ministry of Interior of the Republic of Serbia. Last checked against the official page on 17 May 2026.
What the source confirms
- The Ministry of Interior biometric-passport guidance treats the passport process as an in-person route.
- The official MUP FAQ says a passport applicant may submit a 50 × 50 mm photo.
- That optional photo should be en-face.
- The background should be monochrome grey.
- The photo is not mandatory, so this profile is modeled as a hybrid optional-photo route rather than a universal supplied-photo requirement.
Questions people ask before cropping
What size must a passport photo be in Serbia?
50 × 50 mm. 70–80% of photo height.
How many pixels is 50 × 50 mm when printed?
591 × 591 px (300 dpi) · 1181 × 1181 px (600 dpi).
How much of the frame should the head take?
70–80% of photo height.
What background does this document need?
Plain grey background.
What can’t be fixed here for free?
Hard shadows and uneven light on the face. A smile, raised brows or a half-open mouth. Cropping keeps the face it was given. Clothing and pose. Shoulders out of frame, body turned away from the camera. AI fixes this from the same photo — you see the result before paying.
How many photos fit on one 10×15 cm sheet?
2 × 2 frames fit on one 10×15 cm sheet — 4 copies from a single print.